If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Kenny, you don't need a ladder for a Flats Cat unless you are getting old and fat.
Well, yes and no. Yes, I am getting old, but I'm in good shape. There are two reasons I need a ladder. I keep damaging waders from throwing my right leg over the gunnel getting in during the winter. Simms wanted to know why in the hell my waders kept separating layers on the inside thigh & knee of the right leg only! LOL
My family can't get back in if we are swimming or tubing, and if I happen to anchor deep, it is harder than it needs to be.
I had one very similar. Ladders are great-these youngins will get it someday-after all, the stats show that the young kids today will be fatter than us when our age!!!
"Hey Hillary, regarding the Benghazi Attack on 9/11-we'll just blame it on that movie, not my total lack of security. By the way, what's so significant about 9/11 anyway-was that a date my buddy Bill Ayers of the Weather Underground blew up a government building?" asked Obama to Hillary. BEAUTIFY AMERICA, RUN OVER A LIBERAL, THEN BACK UP AND SEE IF HE'S DEAD.
Well, yes and no. Yes, I am getting old, but I'm in good shape. There are two reasons I need a ladder. I keep damaging waders from throwing my right leg over the gunnel getting in during the winter. Simms wanted to know why in the hell my waders kept separating layers on the inside thigh & knee of the right leg only! LOL
My family can't get back in if we are swimming or tubing, and if I happen to anchor deep, it is harder than it needs to be.
hey guys, i don't have any anodized material. will only be able to do it out of raw aluminum. will have to be painted or powder coated. if you can come up with some anodized material, give me a shout. trouble with that stuff is that you have to buy a box of it, can't just buy a small amount, at least i haven't found anyone yet.
stainless is good, works better than aluminum, but it has to be buffed to a shine.
I will get the cost for each to compare. I have 30' of 1.00"x.049 of SS316. You think that would work. Do you have a tubing bender for that material? I dont really care if its shinny but curious how much work is it to make it shine? Can you weld and bend SSSD 2507?
I need a det of racks made for my front bumper...I have the mounting holes for fog lights that I'd like to utilize. I don't know if that will help if you have to place a bigger order. Thinking a 4 rack mount...and powder coated would be my preference, but aluminum would be fine too!
Don't be a Nancy!
If it smells like fish....you know I've been there!
Comment