Bert, I still need to run by there but this past weekend was hectic and I came back late Saturday. This weekend is not looking good either.
468x80 Banner
Collapse
Announcement
Collapse
No announcement yet.
Rigging some flounder lights...
Collapse
X
-
Originally posted by 2112 View PostWhen you seal that pvc together, make sure to only use blue pvc cement and don't even consider RTV. Also scuff up the sealing sufaces and then wash them with soapy water before cementing. If you stay with those little starbrite lights, I believe they are already sealed in which case I suggest you just fit the assembely together without cement and take the rig to a swimming pool at night to see exactly what your light pattern is going to look like. At the pool or waterever body of water you happen to be using, you can then turn the assembely into the best postions. When it is set just right, carefully handle the rig without losing its positions and mark the joints with a black magic marker. Now you can cement it back together perfectly. If you go with the forward facing TTF style bulbs it will be criticle that they are water-tight.
Good luck.
Let's see if the HOA gets upset with my electrical system floating in their pool laterWe are West End Anglers, a saltwater tribe!
Comment
-
I can drop off my old 12v system at sandys for you fri nite. You can salvage parts from this light-bar assy such as tees and elbows and the bulbs are still good too. Let me know and I will do this if you can pick the stuff up from his place this weekend.
281 772 8884
leave msg for yes or no, or reply to this post.
Berthttp://www.youtube.com/watch?v=FBLbrJxGtro
Not that much different than a Karankawa indian hunting the shallows at night with a torch and a spear.
Comment
-
These are the lights.
http://www.youtube.com/watch?v=FBLbrJxGtro
Not that much different than a Karankawa indian hunting the shallows at night with a torch and a spear.
Comment
-
You would have need some clear polycarbonate round or square tubing and caps from taplastic.com
Pardon the images.
http://www.tapplastics.com/shop/product.php?pid=276&
You can add an exta extensions to your pvc pipe. YOu would just have to use some type of sealant.
If your handy with cutting tools, you can fabricate a lexan square case and buy the LEDS on a PCB off ebay and also light up the ocean floor.Last edited by PasadenaMan; May 28, 2009, 02:30 PM.NoBama
Comment
Comment